WT GERM KILLER® - UVC BODYLight
UVC Rechargeable Battery-Powered LED Light
|*Certified Explosion Proof under UL844 by Intertek for use in:|
Class I, Div 1 & 2, Groups C & D;
Lighthead may be powered with a power supply box for continuous use.
|Battery Charger is Ordinary Location listed:|
UL153 – Not Explosion Proof
UVC LED Wavelength: 275nm peak
|UVC Output Power:|
at Window Face: ~260 mW/cm²
with Bristle Cone: 60°
on Charged Battery-Pack: ~4hrs
|UVC Activation Code:|
May be programmed with a code to activate/ deactivate UVC function.
3.67"L x 2.97"W x 7.58"H x Ø2.67"
Light head: 1.90lbs
Machined out of Solid Blocks of 6061-T6 Aluminum
|Bristle Cone attachment:|
To control surface contact distance and germicidal zone.
Rechargeable, Li-Ion (Approved for Shipping)
|Battery Pack Transportation Compliance:|
The BODYLight™ Battery Pack, consisting of lithium ion cells external to the Explosion Proof Canister, was examined for conformance to UN/DOT 38.3, Transportation Testing, by Intertek Laboratories. Conformance verification to the Standard for the Battery Pack was issued on November 16, 2017. (Report No.: 103190396CRT-002)
The BODYLight™ Battery Pack passed all test procedures for Altitude Simulation, Thermal Test, Vibration, Shock, External Short Circuit, and Overcharge/Discharge, ensuring its compliance and safety for air and ground transportation.
Further, with the Battery Pack encased in an Explosion Proof Canister, compliant to UL 62133, 153, and 844, provides even greater assurance of safety during transportation.
Dr. Michael S. Kralik
|Charger Base Input:|
Frequency of Input: 120/240 VAC, 50/60 Hz, 1A
|Charger Base Compliance:|
– UL 1310
Magnet Mounting attachment
|Part Numbers (replacement parts):|
#8910UVC (UVC BODYLight™) – Complete System: (1) Lighthead, (1) Rechargeable Battery, (1) Charger, & (1) Carrying Case (1) Mounting option.
#8910 NC (BODYLight™) – No Case Option: (1) Lighthead, (1) Rechargeable Battery, (1) Charger (1) Mounting option.
#8910 BATTERY – Rechargeable Auxiliary Battery for the BODYLight™ (extra/replacement).
#8910 BATTERY CHARGER – Battery Charger for the BODYLight™ (extra/replacement).
#8910 INVERTER – DC Power Inverter to be used with the BODYLight™.
#8910 CASE – Lime Green Resin Case for the BODYLight™.
#8910 CLIP – Clip Mount for the BODYLight™.
#8910 DUAL BATTERY BELT PACK – 2 Battery Belt pack (manifold) for the BODYLight™.
#8910 HOOK – Hook mount for the BODYLight™.
#8910 UVC LIGHTHEAD – UVC Lighthead only (extra/replacement).
#8910 LIGHTHEAD – Lighthead only (extra/replacement).
#8910 MAGNET – Magnet Mount for the BODYLight™.
#8910 TRIPOD – Tripod Base for the BODYLight™.
#8910 BL Harness – Body Harness: 40” (small to 40” Girth)
|Country of origin:|
Designed & Manufactured in the USA
Model 8910UVC | UVC Rechargeable Battery-Powered LED Light
Western Technology is very aware of the urgent need to address the safety of workers in our current pandemic situation. We have the technology and capability to ensure deployment of a dependable germicidal UVC lighting system. Our solution is the WT GERM KILLER®. This UVC LED light is built around our existing BODYLight™ platform that is currently used by our marine, industrial and aviation customers. It is a rugged handheld battery-operated light equipped with 275nm UVC LEDs and “red” LEDs for visual assistance.
5 Most Frequently Asked Questions
How effective is the UVC BODYLight at killing COVID-19?
How much UVC radiation can a person be safely exposed to?
How much does it cost to operate the UVC BODYLight?
How does UVC light kill the COVID-19 virus?
Does the UVC BODYLight generate ozone gas?
UVC Light Emissions
The projected angle of the light emission is over 120°, providing wide UVC coverage and an efficient sanitizing zone of germicidal radiation. The “red”” visible light emission is provided not only to see where to disinfect, but also to provide a visual reference as to where the invisible UVC light is projected. This is for your safety and the safety of others during operation.
Note: UVC option requires operator wear PPE and confirmation required training has been completed. UVC 275nm can be hazardous to human health with extended unprotected exposure.
The 275nm peak wavelength of UVC emissions generated from the WT GERM KILLER®, kills germs & viruses in less than 2 seconds¹ when held 4-inches from a surface.
¹ It has been shown that a 1-second exposure of 265nm UVC light at 1.93 mW/cm2 was sufficient to induce a 100% germicidal effect on microorganisms. (Note: 262nm UVC radiation has been shown to be the peak germicidal wavelength.) Dean SJ, Petty A, Swift S, et al. “Efficacy and safety assessment of a novel ultraviolet C device for treating corneal bacterial infections.” Clin Experiment Ophthalmol. 2011; 39(2):156–163. [PubMed: 21105972] read full article
The bumpers on the WT GERM KILLER® – UVC BODYLight are fluorescent orange in color to allow for quick recognition of the purpose of this light. Further the glow-in-the-dark features on the top of the light head and the ring around the battery pack will continue to glow for about 24 hours to aid in FOD safety.
Battery Pack & Power Supply Options
The Battery Pack used with the WT GERM KILLER® – UVC BODYLight is interchangeable with the standard BODYLights currently, so there is commonality in charging and deployment already established. The runtime on a single charge is about 4-hours at high power. The light head can also be connected to a belt-mounted manifold equipped with two battery packs, and a 6-foot cable, providing 8-hours of operations. There is also a power supply box & plug available for longer continuous use.
Bristle Cone Attachment
Another feature for added safety is the Bristle Cone. This cone provides a quick reference for the user as to the effective sanitizing field distance from a surface and also to protect from scattered UVC light off of surfaces to the user and other workers in the vicinity. The Bristle Cone is constructed with nylon bristles set in a ring that is held in place by the front bumpers.
For pricing and availability on the WT GERM KILLER® – UVC BODYLight…
Click the “Add to Cart” button above and submit a product inquiry today!
Go to our Industries & Applications page to view more examples of our lights in use.
Designed & Manufactured in the USA
*Equipment specifications, options & availability subject to change.
(Last update: Oct. 13, 2020)